Cubiertas adosadas

Maikel Casado

December 2017

Lean-to telescopic enclosure with a geometry consisting of a lowered arch roof combined with vertical side walls with supports at different level.

15.20 m width × 45.10 m length × 6.00 m overall building height.
Enclosure divided into 4 retractable central portions plus 2 fixed end portions.

Central towards both ends.

0.08 m/s

Pedro Villahermosa Moraleda

February 2014

Lean-to telescopic enclosure with a geometry consisting of a lowered arch cover combined with vertical extensions and supports at different level (Bottom level: + 0.00 m – Top level: + 3.49 m from FFL).

20.00 m width × 29.72 m cover length × 37.00 m rails length ×6.27 m overall building height.
Enclosure divided into 5 movable cover modules.

Daniel Mediavilla & Jorge Arau

March 1997

Lean-to telescopic enclosure with a vaulted quadrant shape supported at different level. The facility is completed with two fixed glazed façades.

8.00 m width × 13.00 m length.
Enclosure divided into 4 retractable cover segments plus 2 end fixed segments.

Central towards both ends.

0.06 m/s

Joan Francesc Chico i Contijoch

January 1997

Lean-to telescopic enclosure with a geometry consisting on a mono-pitched roof combined with a vertical side wall extension.

11.00 m width × 24.00 m length.
Enclosure divided into 4 portions, 3 of which are mobile and the other 1 is fixed.

Telescopic, in one direction, from the largest to the smallest module.

0.13 m/s

Juan Ignacio Herrero Fernández

May 1999

Lean-to telescopic enclosure with an elliptic double-spoke roof shape.

36.5 m width × 43.00 m length × 11.85 m enclosure height.
Roof divided into 3 mobile cover modules plus 1 fixed end module.

Telescopic, in one direction.

0.07 m/s

Xavier Herrera

April 2002

Lean-to telescopic enclosure with a cross-section that consists of a lowered arch cover shape completed by a sloping side wall.

17.92 m width × 30.36 m length × 8.20 m overall building height.
Enclosure divided into 6 portions, 5 of which are mobile and the other 1 is fixed.

Marc Vidal & Joan Lacaya

November 2010

Lean-to telescopic enclosure with a pitched-roof configuration (8 % of slope) plus one side extension.

17.80 m width × 28.50 m length × 2.50 m minimum inside height × 5.13 m overall building height.
Enclosure divided into 4 central moving portions plus 2 end fixed portions.

Central towards both ends.

0.13 m/s